Page 70 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 70

 HOSE
ISOBARIC BRAID
  T4000S EXTREMELY ABRASION RESISTANT MSHA
COMPACT ISOBARIC HOSE
280 BAR / 4100 PSI
      RECOMMENDED FOR:
High pressure hydraulic oil lines. Constant pressure (Isobaric) 280 bar / 4100 psi in all sizes. Small bend radius and compact dimensions are advantages in installations.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: ISO 18752-BC, SAE 100R19.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One braid (-04 size) or two braids (-05 to -12 size) of high tensile wire.
COVER:
SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion
resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification.
FEATURES:
Constant pressure 280 bar / 4100 psi in all sizes for easy system design and hose selection. Small bend radius and compact dimensions are advantages in installations.
MSHA - FLAME RESISTANCE:
SLIDER complies with Flame Resistant requirements
of Australian Standard AS 2660 and Methods of Test
AS 1180.10B. Meets Flame Resistant Designation
“U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +100°C (-40°F to +212°F).
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -12) pages 189 to 234. Assembly Instructions pages 480.
 T4000S – SLIDER COMPACT ISOBARIC HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
  Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE
T4005S 8 -05 8,2 5/16 15,6 0.61 280 4100 1120 16400 55 2.2 0,34 0.23 T2000
T4008S 12 -08 13,0 1/2 20,6 0.81 280 4100 1120 16400 90 3.6 0,51 0.34 T2000
T4012S 19 -12 19,1 3/4 28,4 1.12 280 4100 1120 16400 120 4.7 0,92 0.62 T2000 Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
 T4004S
6
-04
6,6
1/4
11,8
0.46
280
4100
1120
16400
50
2.0
0,17
0.12
 T2000
 T4006S
10
-06
9,8
3/8
16,6
0.65
280
4100
1120
16400
65
2.6
0,37
0.25
T2000
T4010S
16
-10
16,2
5/8
23,4
0.92
280
4100
1120
16400
100
3.9
0,61
0.41
T2000
      68 RYCO QUALITY


   68   69   70   71   72