Page 71 - 2019 RYCO Product Technical Manual V1-8
P. 71

     ISOBARIC BRAID
T5000D
EXTRA ABRASION RESISTANT FRAS
COMPACT ISOBARIC HOSE 350 BAR / 5100 PSI
                                                                                                                        RECOMMENDED FOR:
Very high pressure hydraulic oil lines. Constant pressure (Isobaric) 350 bar / 5100 psi in all sizes. Small bend radius and compact dimensions are advantages in installations.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: ISO 18752-BC.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Two braids of high tensile steel wire.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.
FEATURES:
Constant pressure 350 bar / 5100 psi in all sizes for easy system design and hose selection. Small bend radius and compact dimensions are advantages in installations.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARDTM complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +100°C (-40°F to +212°F).
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -16) pages 188 to 233. Assembly Instructions pages 478.
   T5000D – DIEHARD COMPACT ISOBARIC HOSE
                        PART NO
 HOSE SIZE
    NOMINAL HOSE ID
   NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
  MINIMUM BURST PRESSURE
   MINIMUM BEND RADIUS
AVERAGE WEIGHT
 COUPLING SERIES
 ONE PIECE
          Hose
  DN
Dash
  mm
 inch
 mm
 inch
 bar
psi
  bar
 psi
 mm
 inch
 kg/m
 lb/ft
 NON-SKIVE
  T5004D
   6
 -04
   6,6
  1/4
  13,2
  0.52
  350
 5100
   1400
  20400
  50
  1.97
  0,28
  0.19
  T2000
 T5005D
  8
-05
  8,2
 5/16
 15,6
 0.61
 350
5100
  1400
 20400
 55
 2.17
 0,34
 0.23
 T2000
 T5006D
  10
-06
  9,8
 3/8
 17,1
 0.67
 350
5100
  1400
 20400
 65
 2.56
 0,41
 0.28
 T2000
 T5008D
    12
  -08
    13,0
   1/2
   20,6
   0.81
   350
  5100
    1400
   20400
   90
   3.55
   0,57
   0.38
   T2000
    Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
       CONNECTING PARTNERSHIPS 69
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   69   70   71   72   73