Page 72 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 72

 HOSE
ISOBARIC BRAID
 T5000S EXTREMELY ABRASION RESISTANT MSHA
COMPACT ISOBARIC HOSE
350 BAR / 5100 PSI
      RECOMMENDED FOR:
Very high pressure hydraulic oil lines. Constant pressure (Isobaric) 350 bar / 5100 psi in all sizes. Small bend radius and compact dimensions are advantages in installations.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: ISO 18752-BC.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Two braids of high tensile steel wire.
COVER:
SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion
resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.
FEATURES:
Constant pressure 350 bar/5100 psi in all sizes for easy system design and hose selection. Small bend radius and compact dimensions are advantages in installations.
MSHA - FLAME RESISTANCE:
SLIDER complies with Flame Resistant requirements
of Australian Standard AS 2660 and Methods of Test
AS 1180.10B. Meets Flame Resistant Designation
“U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +100°C (-40°F to +212°F).
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -08) pages 189 to 234. Assembly Instructions pages 480.
 T5000S – SLIDER COMPACT ISOBARIC HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
  Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE
T5005S 8 -05 8,2 5/16 15,6 0.61 350 5100 1400 20400 55 2.2 0,34 0.23 T2000
T5008S 12 -08 13,0 1/2 20,6 0.81 350 5100 1400 20400 90 3.6 0,57 0.38 T2000 Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
 T5004S
6
-04
6,6
1/4
13,2
0.52
350
5100
1400
20400
50
2.0
0,28
0.19
 T2000
 T5006S
10
-06
9,8
3/8
17,1
0.67
350
5100
1400
20400
65
2.6
0,41
0.28
T2000
      70 RYCO QUALITY



















   70   71   72   73   74