Page 74 - 2019 RYCO Product Technical Manual V1-8
P. 74

 HOSE
ISOBARIC BRAID
 T6000S
EXTREMELY ABRASION RESISTANT MSHA
COMPACT ISOBARIC HOSE
420 BAR / 6100 PSI
                                                                                                                         RECOMMENDED FOR:
Extremely high pressure hydraulic oil lines. Constant pressure (Isobaric) 420 bar / 6100 psi in all sizes. Small bend radius and compact dimensions are advantages in installations.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: ISO 18752-BC.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Two braids of high tensile steel wire.
COVER:
SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion
resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.
FEATURES:
Constant pressure 420 bar / 6100 psi in all sizes for easy system design and hose selection. Small bend radius and compact dimensions are advantages in installations.
MSHA - FLAME RESISTANCE:
SLIDER complies with Flame Resistant requirements
of Australian Standard AS 2660 and Methods of Test
AS 1180.10B. Meets Flame Resistant Designation
“U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +100°C (-40°F to +212°F).
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -06) pages 188 to 233. Assembly Instructions pages 478.
T6000S – SLIDER COMPACT ISOBARIC HOSE
                        PART NO
  HOSE SIZE
  NOMINAL HOSE ID
    NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
 AVERAGE WEIGHT
 COUPLING SERIES
 ONE PIECE
          Hose
  DN
 Dash
 mm
inch
  mm
 inch
 bar
 psi
 bar
 psi
mm
  inch
 kg/m
 lb/ft
 NON-SKIVE
  T6004S
   6
  -04
  6,6
 1/4
   13,2
  0.52
  420
  6100
  1680
  24400
 50
   1.97
  0,28
  0.19
  T2000
 T6005S
  8
 -05
 8,2
5/16
  15,6
 0.61
 420
 6100
 1680
 24400
55
  2.17
 0,35
 0.24
 T2000
 T6006S
    10
   -06
   9,8
  3/8
    17,6
   0.69
   420
   6100
   1680
   24400
  65
    2.56
   0,47
   0.32
   T2000
    Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
       72 RYCO QUALITY
   72   73   74   75   76