Page 79 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

ISOBARIC SPIRAL
H5000C LOW TEMPERATURE ISOBARIC SPIRAL HOSE 350 BAR / 5100 PSI
RECOMMENDED FOR:
Very high pressure hydraulic oil lines in application where low temprature enviromental conditions exist. Constant pressure (Isobaric) 350 bar / 5100 psi in all sizes. Small bend radius is an advantage in installations.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: EN 856 Type R13, ISO 18752-CC, SAE100R13.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Four (-12 to -20 size) and six (-32 size) alternating layers of spiralled high tensile steel wire.
COVER:
Black, oil and abrasion resistant synthetic rubber.
FEATURES:
Low temperature hose (-60°C/-76°F). Constant pressure 350 bar / 5100 psi in all sizes for easy system design and hose selection.
Small bend radius is an advantage in installations.
TEMPERATURE RANGE:
-60°C to +100°C (-76°F to +212°F).
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T7000 Series (sizes -12 to -20) pages 274 to 304. Assembly Instructions pages 480.
H5000C – ICEBREAKER ISOBARIC SPIRAL HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE
H5012C 19 H5016C
H5024C
38,1
H5020C
25
31
38
-12
-16
-20
-24
19,1
25,4
31,8
3/4
1
1.1/4
1.1/2
29,6
36,8
45,0
52,7
1.17
1.45
1.77
2.07
350
350
350
350
5100
5100
5100
5100
1400
1400
1400
1400
20400
20400
20400
20400
120
150
210
330
4.7
5.9
8.3
13
1,21
1,72
2,42
3,44
0.81
1.16
1.63
2.31
T7000
T7000
T7000
T7000
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
CONNECTING PARTNERSHIPS 77
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION