Page 82 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 82

 HOSE
ISOBARIC SPIRAL
RECOMMENDED FOR:
Extremely high pressure hydraulic oil lines. Constant pressure (Isobaric) 420 bar / 6100 psi in all sizes. Small bend radius is an advantage in installations.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: EN 856 Type R15, ISO 18752-CC, SAE 100R15.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Four (-06 to -16 size), six (-20 to -24 size) and eight (-32 size) alternating layers of spiralled high tensile steel wire.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T6000 and T7000 Series Crimp Couplings.
FEATURES:
Tested to 1 million impulse cycles at up to 1/2 SAE 100R15 Minimum Bend Radius. World First: World’s first 2” (-32) hose tested to 1 million impulse cycles at 400mm (15.8”) Minimum Bend Radius. Constant pressure 420 bar / 6100 psi in all sizes for easy system design and hose selection. Small bend radius is an advantage in installations.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARDTM complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +121°C (-40°F to +250°F).
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T7000 Series (sizes -06 to -20) pages 273 to 303. T6000 Series (size -12 to -32) pages 251 to 271. Assembly Instructions pages 478.
 H6000D
EXTRA ABRASION RESISTANT FRAS
ISOBARIC SPIRAL HOSE
420 BAR / 6100 PSI
MILLION CYCLE
                                                                                                                                H6000D – DIEHARD ISOBARIC SPIRAL HOSE
                       PART NO
 HOSE SIZE
    NOMINAL HOSE ID
   NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
  MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
AVERAGE WEIGHT
  COUPLING SERIES
  ONE PIECE
                 Hose
  DN
Dash
 mm
  inch
 mm
inch
  bar
 psi
bar
  psi
 mm
 inch
kg/m
  lb/ft
 NON-SKIVE
  H6006D
   10
 -06
  9,5
   3/8
  19,3
 0.76
   420
  6100
 1680
   24400
  75
  2.9
 0,61
   0.41
    T7000
 H6008D
  12
-08
 12,7
  1/2
 22,7
0.89
  420
 6100
1680
  24400
 100
 3.9
0,78
  0.52
  T7000
 H6010D
  16
-10
 15,9
  5/8
 26,2
1.03
  420
 6100
1680
  24400
 110
 4.3
1,00
  0.67
  T7000
 H6012D
  19
-12
 19,1
  3/4
 30,6
1.20
  420
 6100
1680
  24400
 115
 4.5
1,38
  0.93
T6000
  T7000
 H6016D
  25
-16
 25,4
  1
 37,5
1.48
  420
 6100
1680
  24400
 165
 6.5
1,99
  1.34
T6000
  T7000
 H6020D
  31
-20
 31,8
  1.1/4
 46,4
1.83
  420
 6100
1680
  24400
 220
 8.7
2,97
  2.00
T6000
  T7000
 H6024D
  38
-24
 38,1
  1.1/2
 53,1
2.09
  420
 6100
1680
  24400
 350
 13.8
3,81
  2.56
T6000
   H6032D
    51
  -32
   50,8
    2
   71,5
  2.81
    420
   6100
  1680
    24400
   400
   15.8
  7,10
    4.77
  T6000
        Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
       80 RYCO QUALITY
   80   81   82   83   84