Page 84 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

HOSE
ISOBARIC SPIRAL
C6000D ULTRA FLEXIBLE
EXTRA ABRASION RESISTANT FRAS
ISOBARIC SPIRAL HOSE
420 BAR / 6100 PSI
MILLION CYCLE
RECOMMENDED FOR:
Ultra flexiblility and small bend radius provides easy installation in compact environments.
Extremely high pressure hydraulic oil lines.
Constant pressure (Isobaric) 420 bar / 6100 psi in all sizes.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: ISO 18752-CC, SAE 100R15.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Four alternating layers of spiralled high tensile steel wire.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T7000 Series Crimp Couplings.
FEATURES:
Ultra flexibility combined with a small bend radius reduces effort during assembly and installations. Tested to 1 million impulse cycles at up to 1/2 SAE 100R15 Minimum Bend Radius. Constant pressure 420 bar / 6100 psi in all sizes for easy system design and hose selection.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARDTM complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +121°C (-40°F to +250°F).
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T7000 Series (sizes -12 to -16) pages 274 to 304. Assembly Instructions pages 480.
C6000D – DIEHARD ULTRA FLEXIBLE ISOBARIC SPIRAL HOSE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
PART NO
HOSE SIZE
ONE PIECE
Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE C6016D 25 -16 25,4 1 35,8 1.41 420 6100 1680 24400 165 6.5 1,75 1.17 T7000
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
C6012D
19
-12
19,1
3/4
28,5
1.12
420
6100
1680
24400
115
4.5
1,15
0.77
T7000
82 RYCO QUALITY