Page 90 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 90

HOSE
BRAID
    DK1S
EXTREMELY ABRASION RESISTANT EXTRA HIGH PRESSURE
COMPACT ONE WIRE BRAID HOSE
RECOMMENDED FOR:
Extra high pressure hydraulic oil lines in applications where the hose cover is subjected to abrasion. Compact dimensions and small bend radius are advantages in installations where space is limited.
PERFORMANCE:
Exceeds the Performance Requirements of: EN 857 Type 1SC, ISO 11237 Type 1SC.
CONSTRUCTION:
RYCO Proprietary DK1S design.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.
FEATURES:
The extremely abrasion resistant properties of the cover, combined with the extra high working pressures and excellent impulse life, results in increased service life and minimises equipment downtime.
Compact dimensions and small bend radius are advantages in installations where space is limited.
MSHA - FLAME RESISTANCE:
SLIDER meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F).
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -20) pages 189 to 234. Assembly Instructions pages 480.
Not suitable for use with field attachable couplings.
 DK1S - SLIDER EXTRA HIGH PRESSURE NON-SKIVE HOSE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
PART NO
HOSE SIZE
ONE PIECE
  Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE DK15S 8 -05 8,5 5/16 13,4 0.53 250 3625 1000 14500 50 2.0 0,20 0.13 T2000 DK18S 12 -08 13,0 1/2 18,3 0.72 200 2900 800 11600 80 3.1 0,31 0.21 T2000
DK112S 19 -12 19,1 3/4 24,7 0.97 125 1815 500 7260 120 4.7 0,44 0.30 T2000 DK120S 31 -20 31,8 1.1/4 38,4 1.51 100 1450 400 5800 200 7.9 0,79 0.53 T2000
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
 DK14S
6
-04
6,6
1/4
11,6
0.46
295
4280
1180
17120
40
1.6
0,16
0.11
 T2000
 DK16S
10
-06
9,8
3/8
15,0
0.59
230
3340
920
13360
65
2.6
0,24
0.16
T2000
DK110S
16
-10
16,1
5/8
21,5
0.85
150
2175
600
8700
100
3,9
0,38
0.26
T2000
DK116S
25
-16
25,4
1
31,6
1.24
110
1600
440
6400
150
5,9
0,61
0.41
T2000
      88 RYCO QUALITY
   88   89   90   91   92