Page 98 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

HOSE
BRAID
E1
ENERGY
ONE WIRE BRAID HOSE
RECOMMENDED FOR:
High pressure hydraulic oil lines.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: AS 3791 100R1AT, DIN 20022-1SN, EN 853 Type 1SN, ISO 1436 Types R1AT & 1SN, SAE 100R1AT.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Black, oil resistant synthetic rubber. No skiving required with T2000 Series Crimp Couplings and K000 Series Field Attachable Couplings.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F).
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -16) pages 189 to 234. Assembly Instructions pages 480.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -04 to -16) pages 252 to 273. K000 Series ferrule (sizes -04 to -16) page 355. Assembly Instructions page 478.
E1 – ENERGY HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
FIELD ATT
Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft
NON-SKIVE
6000 (K000) 6000 (K000) 6000 (K000) 6000 (K000)
E13
5
03
5,0
3/16
11,4
0.45
250
3,625
1000
14500
90
3.5
0,18
0.12
T2000
6000 (K000)
E14 6 E16 10 E110 16
E116 25
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
-04 6,6 1/4
-06 9,8 3/8
-10 16,2 5/8
13,0 0.52
16,7 0.68
23,4 0.93
225 3250 900
180 2600 720
130 1900 520
13000 100 10400 125 7600 200 5120 300
4.0 0,22 5.0 0,31 7.9 0,49 11.8 0,90
0.15 0.21 0.33 0.60
T2000 T2000 T2000 T2000
E15
8
-05
8,2
5/16
14,6
0.59
215
3100
860
12400
115
4.5
0,25
0.17
T2000
E18
12
-08
13,0
1/2
20,0
0.80
160
2300
640
9200
180
7.0
0,39
0.26
T2000
6000 (K000)
E112
19
-12
19,1
3/4
27,4
1.09
105
1500
420
6000
240
9.5
0,62
0.42
T2000
6000 (K000)
-16 25,4 1
35,8 1.40
90 1280 360
96 RYCO QUALITY