Page 99 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

RECOMMENDED FOR:
High pressure hydraulic oil lines.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: AS 3791 100R2AT, DIN 20022 - 2SN, EN 853 Type 2SN, ISO 1436 Types R2AT & 2SN, SAE 100R2AT.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Two braids of high tensile steel wire.
COVER:
Black, oil resistant synthetic rubber. No skiving required with T2000 and T7000 Series Crimp Couplings and L000 Series Field Attachable Couplings.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F).
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -16) pages 189 to 234. T7000 Series (sizes -06 to -16) pages 274 to 304.
Assembly Instructions pages 480.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -04 to -16) pages 252 to 273. L000 Series ferrule (sizes -04 to -16) page 355. Assembly Instructions page 478.
BRAID
E2
ENERGY
TWO WIRE BRAID HOSE
E2 – ENERGY HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
FIELD ATT
Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft
E25 8 -05 8,2 5/16 16,4 0.65 350 5100 1400 20400 115 4.5 0,42 0.28 T2000
NON-SKIVE
E24
6
-04
6,6
1/4
14,6
0.59
400
5800
1600
23200
100
3.9
0,35
0.24
T2000
6000 (L000)
E26
10
-06
9,8
3/8
18,5
0.74
330
4800
1320
19200
125
5.0
0,51
0.34
T2000
T7000
6000 (L000)
E28 12 -08 13,0 1/2 21,7 0.86 275 4000 1100 16000 180 7.0 0,65 0.44 E212 19 -12 19,1 3/4 28,9 1.15 215 3100 860 12400 240 9.5 0,93 0.62
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
T2000 T2000
T7000 T7000
6000 (L000) 6000 (L000)
E210
16
-10
16,2
5/8
24,9
0.99
250
3625
1000
14500
200
7.9
0,75
0.50
T2000
T7000
6000 (L000)
E216
25
-16
25,4
1
37,3
1.48
165
2400
660
9600
300
11.8
1,30
0.87
T2000
T7000
6000 (L000)
CONNECTING PARTNERSHIPS
97
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION