Hose Couplings Part Number Changes

RYCO’s dedication to customer service is paramount. That’s why we are constantly expanding our range of hose couplings to meet all of your application needs. In 2012, RYCO updated and improved the part numbering system, which was seamlessly integrated across the product range.

This new part numbering system entailed adding an extra numeric character to 2-digit end style (thread/connector termination) codes, and converting most alpha-numeric end styles to a 3-digit code. The exceptions to this rule are the following:

  • “N” will remain in the end style coding where “N” currently represents NPT or NPSM
  • “S” will replace current “SS” in the end style coding where “SS” currently represents Stainless Steel material
  • “B” will remain in the end style coding where “B” currently represents Brass material.

These changes are further highlighted and explained in the examples provided herein on pages 24 and 25 with a cross-reference of Previous to New end style codes listed in the Index by Endstyle Number on pages 26 to 27 in the Couplings section.

To maintain high levels of Customer Service, traceability and accurate product identification, for many years RYCO has been branding both ferrules and inserts of hose couplings. RYCO will continue to provide this level of detail on hose couplings (including ferrules and inserts) bearing the new part numbering format. There will be no change to the identification grooves that currently exist, except for those new hose coupling series’ for which the basic markings/branding are represented on the graphics herein and in the RYCO Crimp Chart.

The basic nomenclature for identifying New to Previous hose coupling series’ is as follows:

<img>

It should be noted that the following remain identical for a coupling branded with the new part numbering convention and its equivalent part branded with the previous part numbering convention:

  • assembly parameters (crimp diameters, mark length and skive lengths)
  • performance
  • design
  • scope of application.

In addition to the hose coupling part numbering change, the following applies:

  • The part number change was effective as of the January 2013 Price List
  • Parts supplied and invoiced under either the new part number or the equivalent previous part number will be of identical price, including discount (excluding agreements over and above pricing listed in current Price List)
  • Parts supplied under the new part number may reflect previous part number branding
  • Both new and previous part numbers will appear on each invoice line until further notice
  • Both new and previous couplings series are matched to the same range of RYCO hoses as listed in current RYCO literature (unless otherwise stated), and should be assembled as per the current RYCO Crimp Chart
  • Thread/Connector and Hose Dash Size numbering remains unchanged.

Branding Examples

The pictorial examples in the following pages indicate the differences in branding and identification between New and Previous Coupling Series. Ferrules are branded with the Coupling Series and the following identification marks;

    • T1000 has no series code grooves
    • T2000 (T200) has two series code grooves
    • T4000 (T400) has three series code grooves
    • T7000 (T700) has four series code grooves
    • T9000 (T900) has six series code grooves
    • TT000 has two series code grooves (one at each end of the ferru le)
    • TG000 has no series code grooves
    • 69000N (6900N) has six series code grooves
      Field Attachable Coupling identification is shown on page 276.
New T2000  Previous T200
To complete the Part Number for Coupling:
Insert Part Branding is R090-0608
Series is T2000 (from T2000 Ferrule Branding or
Two Series Code Grooves)
Simply replace “R” of Insert Part Branding with “T2”
(first two characters of Series)
(replace R with T2) R090-0608 → T2090-0608
To complete the Part Number for Coupling:
Insert Part Branding is R09-0608
Series is T200 (from T200 Ferrule Branding or
Two Series Code Grooves)
Simply replace “R” of Insert Part Branding with “T2”
(first two characters of Series)
(replace R with T2) R09-0608 → T209-0608
New T9000 Previous T900
To complete the Part Number for Coupling:
Insert Part Branding is 9373-1616
Series is T9000 (from T9000 Ferrule Branding or
Six Series Code Grooves)
Simply add “T” to Insert Part Branding
(add T) 9373-1616 → T9373-1616
To complete the Part Number for Coupling:
Insert Part Branding is 937C-1616
Series is T900 (from T900 Ferrule Branding or
Six Series Code Grooves)
Simply add “T” to Insert Part Branding
(add T) 937C-1616 → T937C-1616

How To Order RYCO V Series Field Attachable Couplings

RYCO’s dedication to customer service is paramount. That’s why we are constantly expanding our range of hose couplings to meet all of your application needs. In 2012, RYCO updated and improved the part numbering system, which was seamlessly integrated across the product range.

This new part numbering system entailed adding an extra numeric character to 2-digit end style (thread/connector termination) codes, and converting most alpha-numeric end styles to a 3-digit code. The exceptions to this rule are the following:

  • “N” will remain in the end style coding where “N” currently represents NPT or NPSM
  • “S” will replace current “SS” in the end style coding where “SS” currently represents Stainless Steel material
  • “B” will remain in the end style coding where “B” currently represents Brass material.

These changes are further highlighted and explained in the examples provided herein on pages 24 and 25 with a cross-reference of Previous to New end style codes listed in the Index by Endstyle Number on pages 26 to 27 in the Couplings section.

To maintain high levels of Customer Service, traceability and accurate product identification, for many years RYCO has been branding both ferrules and inserts of hose couplings. RYCO will continue to provide this level of detail on hose couplings (including ferrules and inserts) bearing the new part numbering format. There will be no change to the identification grooves that currently exist, except for those new hose coupling series’ for which the basic markings/branding are represented on the graphics herein and in the RYCO Crimp Chart.

The basic nomenclature for identifying New to Previous hose coupling series’ is as follows:

<img>

It should be noted that the following remain identical for a coupling branded with the new part numbering convention and its equivalent part branded with the previous part numbering convention:

  • assembly parameters (crimp diameters, mark length and skive lengths)
  • performance
  • design
  • scope of application.

In addition to the hose coupling part numbering change, the following applies:

  • The part number change was effective as of the January 2013 Price List
  • Parts supplied and invoiced under either the new part number or the equivalent previous part number will be of identical price, including discount (excluding agreements over and above pricing listed in current Price List)
  • Parts supplied under the new part number may reflect previous part number branding
  • Both new and previous part numbers will appear on each invoice line until further notice
  • Both new and previous couplings series are matched to the same range of RYCO hoses as listed in current RYCO literature (unless otherwise stated), and should be assembled as per the current RYCO Crimp Chart
  • Thread/Connector and Hose Dash Size numbering remains unchanged.

Branding Examples

The pictorial examples in the following pages indicate the differences in branding and identification between New and Previous Coupling Series. Ferrules are branded with the Coupling Series and the following identification marks;

    • T1000 has no series code grooves
    • T2000 (T200) has two series code grooves
    • T4000 (T400) has three series code grooves
    • T7000 (T700) has four series code grooves
    • T9000 (T900) has six series code grooves
    • TT000 has two series code grooves (one at each end of the ferru le)
    • TG000 has no series code grooves
    • 69000N (6900N) has six series code grooves
      Field Attachable Coupling identification is shown on page 276.
New T2000  Previous T200
To complete the Part Number for Coupling:
Insert Part Branding is R090-0608
Series is T2000 (from T2000 Ferrule Branding or
Two Series Code Grooves)
Simply replace “R” of Insert Part Branding with “T2”
(first two characters of Series)
(replace R with T2) R090-0608 → T2090-0608
To complete the Part Number for Coupling:
Insert Part Branding is R09-0608
Series is T200 (from T200 Ferrule Branding or
Two Series Code Grooves)
Simply replace “R” of Insert Part Branding with “T2”
(first two characters of Series)
(replace R with T2) R09-0608 → T209-0608
New T9000 Previous T900
To complete the Part Number for Coupling:
Insert Part Branding is 9373-1616
Series is T9000 (from T9000 Ferrule Branding or
Six Series Code Grooves)
Simply add “T” to Insert Part Branding
(add T) 9373-1616 → T9373-1616
To complete the Part Number for Coupling:
Insert Part Branding is 937C-1616
Series is T900 (from T900 Ferrule Branding or
Six Series Code Grooves)
Simply add “T” to Insert Part Branding
(add T) 937C-1616 → T937C-1616