SRF & SR Hoses Assembly Instructions and Safety Tips

SR & SRF Hoses

ASSEMBLY INSTRUCTIONS FOR:

33000 SERIES SERIES SUCTION HOSE COUPLINGS. USE ONLY MATCHED SERIES OF RYCO SR and SRF SERIES HOSE.

STEP ONE:

006_2_step_one

Cut hose to required length using a cut-off saw.
Ensure helix wires are not protruding.
Ensure hose is cut squarely.

STEP TWO:

006_2_step_two

Mark the cover of the hose to ensure that Clamp will be correctly located.

STEP THREE:

006_2_step_three

Slide Clamp over hose.
Push the coupling into the hose bore until hex or collar abuts end of hose.
Position Clamp, and tighten bolt to recommended torque.

HTML Snippets Powered By : XYZScripts.com