ASSEMBLY INSTRUCTIONS FOR:
1200 SERIES BITELOK TWO-PIECE EXTERNAL SKIVE COUPLINGS.
USE ONLY RYCO T240D HOSE.
Follow same steps as page 504, except for 1200 Series Couplings with T240D hose, Step 2 is as shown on right.
RYCO Crimp Chart detailing External Skive Length and Crimp Diameter is available from RYCO Hydraulics.
STEP TWO:
Mark skive length. (Refer to “RYCO Crimp Chart”).
Cut rubber cover around down to wire reinforcement then slit lengthwise. Raise flap and pull off with pliers.