RYCOLOK & SUPERLOK

» Technical » Thread & Connector Guides » RYCOLOK & SUPERLOK

RYCOLOK & SUPERLOK

RYCOLOK are also called clip fastener & staple.

The RYCOLOK male connector uses an O Ring and backup washer, and seals on the smooth bore of the female. The connection is held together by the staple.

The male staple groove (G) aligns with the drilled holes of the female allowing the staple to be inserted. RYCOLOK and RYCO SUPERLOK use different width staples and are therefore NOT interchangeable.

Thread Connector Staplelok Superloc
NOMINAL SIZE NOM. MALE OD & FEMALE ID RYCOLOK STAPLE SIZE RYCO SUPERLOK STAPLE SIZE
G G S S G G S S
DN inch Dash mm inch mm inch mm inch mm inch mm inch
6 1/4 -06 15 0.59 5,1 0.2 8 0.31
10 3/8 -10 20 0.79 5,1 0.2 13 0.51
12 1/2 -13 24 0.94 5,1 0.2 17 0.67
16 5/8 -16 26 1.02 5,1 0.2 19 0.75
19 3/4 -20 29 1.14 5,1 0.2 22 0.87 9 0.35 22 0.87
25 1 -25 39 1.53 7,1 0.28 29 1.14 13 0.51 29 1.14
31 1.1/4 -32 46 1.81 7,1 0.28 36 1.42 13 0.51 36 1.42
38 1.1/2 -40 55 2.16 7,1 0.28 45 1.77 13 0.51 45 1.77
51 2 -50 64 2.52 7,1 0.28 54 2.13 13 0.51 54 2.13