Metric French Millimetric - RYCO Hydraulics

Metric French Millimetric

Also known as Metric Millimetric

These seal on a 24° cone seat located internally on the male connector using straight fine metric threads.

Metric French GAZ series uses fractional number metric OD tubing, as shown in the table.

Metric French Millimetric series uses whole number metric OD tubing. The two series are not interconnectable.

The male will mate with a straight thread female swivel with spherical nose seat.

The same male also mates with flareless tube, Tube Nut and Compression Olive (Cutting Ring). Tightening of the female nut compresses the olive causing it cut into the tube, thereby forming a seal between the tube, olive and 24° male cone.

threadconnectorid_007

 

MALE THREAD
OD & PITCH
DASH
SIZE
MALE
THREAD OD  
FEMALE
THREAD ID  
TUBE
SIZE
inch – TPI mm inch mm inch mm
M27 x 1,5 -27 27,0 1.06 25,5 1.00 20
M30 x 1,5 -30 30,0 1.18 28,5 1.12 22
M33 x 1,5 -33 33,0 1.30 31,5 1.24 25
M36 x 1,5 -36 36,0 1.41 34,5 1.35 28
M39 x 1,5 -39 39,0 1.54 37,5 1.48 30
M45 x 1,5 -45 45,0 1.77 43,5 1.71 35