RYCO RKV - RYCO Hydraulics

RYCO RKV

The RKV male uses a O Ring and a backup washer which seals on the smooth bore of the female. The connection is held together by the shell and positively retained by the lock nut. RKV High Pressure (RKVP) and High Flow (RKVF) series’ are not interchangeable (including the shell).

* For various adaptors, the Lock Nut OD may vary from standard (Coupling LockNut) OD to the values as listed.

Sealing method: O Ring & Backup Washer

Thread form: none

RYCO RKV Thread Connector Identification

NUT OD

NOMINAL SIZE

OD Coupling Adaptors*
DN inch Dash mm inch mm inch mm inch
HIGH PRESSURE – RKVP
10 3/8 -10 20 0.79 25 0.98 29 1.14
12 1/2 -12 24 0.94 30 1.18 34 1.34
19 3/4 -20 30 1.18 40 1.57 40 1.57
25 1 -25 36 1.42 46 1.81 46 1.81
31 1.1/4 -32 44 1.73 52 2.05 59 2.32
38 1.1/2 -40 54 2.13 64 2.52 72 2.83
51 2 -50 70 2.76 78 3.07 85 3.35
63 2.1/2 -63 84 3.31 98 3.86 110 4.33
HIGH FLOW – RKVF
25 1 -25 33 1.30 42 1.65 42 1.65
31 1.1/4 -32 39.8 1.57 50 1.97 50 1.97
38 1.1/2 -40 53 2.09 64 2.52 72 2.83
51 2 -50 65 2.56 75 2.95 80 3.15
63 2.1/2 -63 75 2.95 85 3.35 90 3.54
76 3 -75 99.3 3.91 110 4.33 125 4.92