STAPLELOK / SUPERLOK SAE J1467 - Threads & Fitting Sizes

STAPLELOK SUPERLOK SAE J1467

SAE J1467
RYCOLOK are also called CLIP FASTENER & STAPLE

The RYCOLOK male connector uses an O Ring and backup washer, and seals on the smooth bore of the female. The connection is held together by the staple.

The male staple groove (G) aligns with the drilled holes of the female allowing the staple to be inserted. RYCOLOK and RYCO SUPERLOK use different width staples and are therefore NOT interchangeable.

threadconnectorid_012

threadconnectorid_013

NOMINAL
SIZE
NOM. MALE OD
& FEMALE ID
RYCOLOK STAPLE SIZE RYCO SUPERLOK STAPLE SIZE
G G S S G G S S
DN inch Dash mm inch mm inch mm inch mm inch mm inch
6 1/4 -06 15 0.59 5,1 0.2 8 0.31
10 3/8 -10 20 0.79 5,1 0.2 13 0.51
12 1/2 -13 24 0.94 5,1 0.2 17 0.67
16 5/8 -16 26 1.02 5,1 0.2 19 0.75
19 3/4 -20 29 1.14 5,1 0.2 22 0.87 9 0.35 22 0.87
25 1 -25 39 1.53 7,1 0.28 29 1.14 13 0.51 29 1.14
31 1.1/4 -32 46 1.81 7,1 0.28 36 1.42 13 0.51 36 1.42
38 1.1/2 -40 55 2.16 7,1 0.28 45 1.77 13 0.51 45 1.77
51 2 -50 64 2.52 7,1 0.28 54 2.13 13 0.51 54 2.13