Test Codes - Mine Safe Connection System - RYCO Hydraulics

Mine Safe Connection System

The CROCBITE male uses a rubber seal which seals on the smooth bore of the female. The connection is held together by the CROCTAIL and cannot be disconnected under pressure. CROCBITE High Pressure and High Flow series’ are not interchangeable, however the CROCTAIL is common for both series. -10 & -12 CROCBITE male & female can interchange with STAPLELOK. -20 CROCBITE female can connect with STAPLELOK male.

Sealing method: O Ring & Backup washer, or profiled seal

Thread form: none

RYCO Crocbite

GROOVE WIDTH CROCTAIL LENGHT
NORMAL SIZE OD G G L L
DN inch Dash mm inch mm inch mm inch
HIGH PRESSURE
10 3/8 -10 20 0.79 5 0.20 65 2.6
12 1/2 -12 24 0.94 5 0.20 75 3.0
19 3/4 -20 29 1.14 5 0.20 95 3.7
25 1 -25 40 1.57 6 0.24 130 5.1
31 1.1/4 -32 47 1.85 6 0.24 160 6.3
38 1.1/2 -40 56 2.20 6 0.24 190 7.5
51 2 -50 68 2.68 10 0.39 210 8.3
63 2.1/2 -63 89 3.50 10 0.39 250 9.8
76 3 -75 100 3.94 10 0.39 300 11.8
HIGH FLOW
51 2 -50 69 2.72 10 0.39 210 8.3
63 2.1/2 -63 89 3.50 10 0.39 250 9.8
76 3 -75 101 3.98 10 0.39 300 11.8

420 BAR

1,000,000 + Impulse Cycles

Conforms with the requirements of MDG41

MDG 41 Safe