750/760
Additional information
750/760
Spring Guard
RECOMMENDED FOR:
TJ24D and TJ26D Specialist Jacking Hose Assemblies, to control bend radius at end of hoses to avoid excessive strain on hose couplings. Can also be used with E24, E26, SURVIVOR/24, SURVIVOR/26, T24C, T24D, T24S, T26C, T26D and T26S Hoses. Can be used with L000 Series Field Attachable and T2000 Series BITELOK Couplings.
750 Suits some -4 (1/4”) and -6 (3/8”) hoses
760 Suits some -6 (3/8”) hoses
CONSTRUCTION:
Spring Steel Wire; galvanised for corrosion protection.
ASSEMBLY INSTRUCTIONS:
Slide Spring Guards over the hose before assembling hose ends. After ends are assembled, twist and push Spring Guards onto the ferrules. The close pitched end of the Spring Guard goes over the ferrule, and the wide pitched end goes over the hose (as depicted in below image).
DISCLAIMER:
We reserve the right to modify our products and/or related services and/or discontinue the manufacture and/or supply of any of the products and/or related services, without notice. The only official source of technical crimping parameters regarding our products is our Crimp Digital Tools. Printed copies are uncontrolled therefore, please be sure to download the latest version of our App or visit our Web Tool: