T240D Hose - RYCO Hydraulics

T240D Hose

ASSEMBLY INSTRUCTIONS FOR:

1200 SERIES BITELOK TWO-PIECE EXTERNAL SKIVE COUPLINGS.
USE ONLY RYCO T240D HOSE.

Follow same steps as page 504, except for 1200 Series Couplings with T240D hose, Step 2 is as shown on right.

RYCO Crimp Chart detailing External Skive Length and Crimp Diameter is available from RYCO Hydraulics.

STEP TWO:

003_step_two

Mark skive length. (Refer to “RYCO Crimp Chart”).
Cut rubber cover around down to wire reinforcement then slit lengthwise.
Raise flap and pull off with pliers.