T1F FIRE SUPPRESSION – One Wire Braid 1300-3600 psi Hose

Type Approvals:

Type Approvals

Technical Specifications:

Recommended For

Use in Fire Suppression Systems of off-road vehicles, mining equipment, stationary engines, etc. The hose is coloured red, for easy identification as part of the Fire Suppression System.

Construction

TUBE: Black, oil resistant synthetic rubber. Resistant to aqueous film forming foam, dry chemical powder, carbon dioxide, and water based fire extinguishing agents.

REINFORCEMENT: One braid of high tensile steel wire.

COVER: Red, heat resistant, abrasion resistant and oil resistant rubber. Flame Resistant to Australian Standard AS 2660 and U.S. MSHA requirements. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings and K000 Series Field Attachable Couplings.

Performance

FRAS – FLAME RESISTANCE AND ANTI-STATIC: Complies with Flame Resistant requirements of Australian Standard AS 2660 and Method of Test AS 1180.10B Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

TEMPERATURE RANGE: From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.

WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

T1F – FIRE SUPPRESSION NON-SKIVE HOSE			MATCHED COUPLINGS SERIES
PART NO	HOSE SIZE		ONE PIECE	FIELD ATT
HOSE	DN	DASH	NON-SKIVE
T13F	5	-03	T2000	6000 (K000)
T14F	6	-04	T2000	6000 (K000)
T15F	8	-05	T2000
T16F	10	-06	T2000	6000 (K000)
T18F	12	-08	T2000	6000 (K000)
T110F	16	-10	T2000	6000 (K000)
T112F	19	-12	T2000	6000 (K000)
T116F	25	-16	T2000	6000 (K000)

Content missing

T1F FIRE SUPPRESSION – One Wire Braid 1300-3600 psi Hose

Type Approvals:

Technical Specifications: