T2S – Two Wire Braid 1300-6100 psi Hose SLIDER Cover

Type Approvals:

Type Approvals

Technical Specifications:

Recommended For

High pressure hydraulic oil lines in applications where the outside cover of the hose is subjected to sliding abrasion that may cause premature failure of standard hoses.

Construction

TUBE: Black, oil resistant synthetic rubber.

REINFORCEMENT: Two braids of high tensile steel wire.

COVER: SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 & T7000 Series Crimp Couplings.

Performance

MSHA – FLAME RESISTANCE: SLIDER complies with Flame Resistant requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

TEMPERATURE RANGE: From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.

WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

T2S – SLIDER NON-SKIVE HOSE			MATCHED COUPLINGS SERIES
PART NO	HOSE SIZE		ONE PIECE	FIELD ATT
HOSE	DN	DASH	NON-SKIVE
T24S	6	-04	T2000
T25S	8	-05	T2000
T26S	10	-06	T2000	T7000
T28S	12	-08	T2000	T7000
T210S	16	-10	T2000	T7000
T212S	19	-12	T2000	T7000
T216S	25	-16	T2000	T7000
T220S	31	-20	T2000	T7000
T224S	38	-24	T2000	T7000
T232S	51	-32	T2000	T7000

Content missing

T2S – Two Wire Braid 1300-6100 psi Hose SLIDER Cover

Type Approvals:

Technical Specifications: