| CS1000 – MINESPRAY HOSE | MATCHED COUPLINGS SERIES | ||
|---|---|---|---|
| PART NO | HOSE SIZE | ONE PIECE | |
| HOSE | DN | DASH | NON-SKIVE |
| MS1008 | 12 | -08 | T2000 |
| MS1010 | 16 | -10 | T2000 |
| MS1012 | 19 | -12 | T2000 |
| MS1016 | 25 | -16 | T2000 |
| MS1020 | 31 | -20 | T2000 |
| MS1024 | 38 | -24 | T2000 |
| MS1032 | 51 | -32 | T2000 |
Additional information
MS1000 MINESPRAY
MS1000 MINESPRAY
RECOMMENDED FOR:
Water and air spray suited for dust control in all industrial and mining applications.
TUBE:
Black, oil resistant synthetic rubber. Cover is perforated (pin-pricked).
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Yellow, oil resistant and abrasion resistant synthetic rubber. No skiving required with T2000 Series Crimp Couplings.
MSHA – FLAME RESISTANCE:
Complies with Flame Resistant requirements of Australian Standard AS 2660 and Method of Test AS 1180.10B. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F).
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series.
DISCLAIMER:
We reserve the right to modify our products and/or related services and/or discontinue the manufacture and/or supply of any of the products and/or related services, without notice. This document supersedes all previous versions and previously issued documentation. The only official source of technical crimping parameters regarding our products is our Digital Crimp Tools. Printed copies are uncontrolled therefore, please be sure to use the latest versions of our Ryco Crimp App or Ryco Crimp Web Tool. Don’t mix and match: always use original hoses and fittings. For more information, see our Safety Guide.