| BT1 – BIOTRANS HOSE | MATCHED COUPLINGS SERIES | |||
|---|---|---|---|---|
| PART NO | HOSE SIZE | ONE PIECE | FIELD ATT | |
| HOSE | DN | DASH | NON-SKIVE | |
| BT14 | 6 | -04 | T2000 | 6000 (K000) |
| BT15 | 8 | -05 | T2000 | |
| BT16 | 10 | -06 | T2000 | 6000 (K000) |
| BT18 | 12 | -08 | T2000 | 6000 (K000) |
| BT110 | 16 | -10 | T2000 | 6000 (K000) |
| BT112 | 19 | -12 | T2000 | 6000 (K000) |
| BT116 | 25 | -16 | T2000 | 6000 (K000) |
Additional information
BT1 BIOTRANS
BT1 BIOTRANS
One wire braid hose.
RECOMMENDED FOR:
Transportation, marine fuel and engine hose applications. Low pressure hydraulic oil return lines, general purpose water, glycol antifreeze solutions, biodiesel, diesel fuel, ethanol, gasoline/petrol or air.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of:
SAE J1527 Type Class I, USCG SAE J1942, SAE J30R2 (non-marine). Meets SAE J30R2 performance requirements for non-marine applications and SAE J1527 Type Class I and USCG SAEJ1942 for marine applications.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Blue, oil resistant and abrasion resistant synthetic rubber.
MSHA – FLAME RESISTANCE:
Complies with Flame Resistant requirements of Australian Standard AS 2660 and Method of Test AS 1180.10B. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, DOT, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -16).
FIELD ATTACHABLE NON-SKIVE
6000 Series insert (sizes -04 to -16).
K000 Series ferrule (sizes -04 to -16).
Related products
DISCLAIMER:
We reserve the right to modify our products and/or related services and/or discontinue the manufacture and/or supply of any of the products and/or related services, without notice. This document supersedes all previous versions and previously issued documentation. The only official source of technical crimping parameters regarding our products is our Digital Crimp Tools. Printed copies are uncontrolled therefore, please be sure to use the latest versions of our Ryco Crimp App or Ryco Crimp Web Tool. Don’t mix and match: always use original hoses and fittings. For more information, see our Safety Guide.