H4000S ISOBARIC – Four-Six Wire Spiral 4100 psi Hose SLIDER Cover

Type Approvals:

Type Approvals

Technical Specifications:

Recommended For

High pressure hydraulic oil lines. Constant pressure (Isobaric) 280 bar / 4100 psi in all sizes. Small bend radius is an advantage in installations.

Construction

TUBE: Black, oil resistant synthetic rubber.

REINFORCEMENT: Four (-06 to -24 size) and six (-32 size) alternating layers of spiralled high tensile steel wire.

COVER: SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T7000 Series Crimp Couplings.

Performance

FEATURES: Tested to 1 million impulse cycles at up to 1/2 SAE 100R12 Minimum Bend Radius. Constant pressure 280 bar / 4100 psi in all sizes for easy system design and hose selection. Small bend radius is an advantage in installations.

MSHA – FLAME RESISTANCE: SLIDER complies with Flame Resistant requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

TEMPERATURE RANGE: -40°C to +121°C, (-40°F to +250°F.) For water, emulsions etc. see page 58.

WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

H4000S – SLIDER ISOBARIC SPIRAL HOSE			MATCHED COUPLINGS SERIES
PART NO	HOSE SIZE		ONE PIECE
HOSE	DN	DASH	NON-SKIVE
H4006S	10	-06	T7000
H4008S	12	-08	T7000
H4010S	16	-10	T7000
H4012S	19	-12	T7000
H4016S	25	-16	T7000
H4020S	31	-20	T7000
H4024S	38	-24	T7000
H4032S	51	-32	T7000

Content missing

H4000S ISOBARIC – Four-Six Wire Spiral 4100 psi Hose SLIDER Cover

Type Approvals:

Technical Specifications: