H5000S ISOBARIC – Four-Six Wire Spiral 5100 psi Hose SLIDER Cover

Type Approvals:

Type Approvals

Technical Specifications:

Recommended For
Very high pressure hydraulic oil lines. Constant pressure (Isobaric) 350 bar / 5100 psi in all sizes. Small bend radius is an advantage in installations.
Construction
TUBE: Black, oil resistant synthetic rubber.

REINFORCEMENT: Four (-06 to -20 size) and six (-24 to -32 size) alternating layers of spiralled high tensile steel wire.

COVER: SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T6000 & T7000 Series Crimp Couplings.

Performance
FEATURES: Tested to 1 million impulse cycles at up to 1/2 SAE 100R13 Minimum Bend Radius. Constant pressure 350 bar / 5100 psi in all sizes for easy system design and hose selection. Small bend radius is an advantage in installations.

MSHA – FLAME RESISTANCE: SLIDER complies with Flame Resistant requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

TEMPERATURE RANGE: -40°C to +121°C, (-40°F to +250°F.) For water, emulsions etc. see page 58.

WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

Read More

H5000S ISOBARIC – Four-Six Wire Spiral 5100 psi Hose SLIDER Cover

H5000S – SLIDER ISOBARIC SPIRAL HOSE MATCHED COUPLINGS SERIES
PART NO HOSE SIZE ONE PIECE FIELD ATT
HOSE DN DASH NON-SKIVE
H5006S 10 -06 T7000
H5008S 12 -08 T7000
H5010S 16 -10 T7000
H5012S 19 -12 T6000 T7000
H5016S 25 -16 T6000 T7000
H5020S 31 -20 T6000 T7000
H5024S 38 -24 T6000 T7000
H5032S 51 -32 T6000

Content missing